White Papers

Usage
Information
NOTE: The vrf option is available only when VRF feature is enabled.
show ip
accounting
access-
lists Field
Description
“Extended IP...” Displays the name of the IP ACL.
“seq 5...” Displays the filter. If the keywords count or byte were configured in the filter,
the number of packets or bytes the filter processes is displayed at the end of the
line.
“order 4” Displays the QoS order of priority for the ACL entry.
Example
DellEMC# show ip accounting access-list
!
Standard Ingress IP access list test on TenGigabitEthernet 0/88
Total cam count 2
seq 5 permit 1.1.1.0/24 any negotiate 150 monitor 300 count (0 packets)
seq 10 deny 2.1.1.0/24 count (0 packets)
DellEMC#
DellEMC# show ip accounting access-list L3-ACL vrf vrf3
!
Standard Ingress IP access list L3-ACL on vrf3
Total cam count 3
seq 5 permit 10.1.2.0/24 any negotiate 150 monitor 300 count (0 packets)
seq 10 permit 20.1.2.0/24
seq 15 permit 30.1.2.0/24
DellEMC#
show ip access-lists
Display all of the IP ACLs configured in the system, whether or not they are applied to an interface, and the count of matches/
mismatches against each ACL entry displayed.
Syntax
show ip access-lists [access-list-name] [interface interface] [in | out]
[vrf vrf-name]
Parameters
access-list-name Enter the name of a configured MAC ACL, up to 140 characters.
interface
interface
Enter the keyword interface followed by the one of the following keywords and
slot/port or number information:
● For a VLAN interface, enter the keyword vlan followed by the slot/port
number.
● For a Port Channel interface, enter the keyword port-channel followed by a
number.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
in | out Identify whether ACL is applied on the ingress or egress side.
vrf vrf-name Enter the keyword vrf and then the name of the VRF to display the access-lists
that are configured on either the default or non-default VRFs.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Access Control Lists (ACL) 193