CLI Guide

LinecardId Type Status ReqTyp CurTyp Version Ports
-------------------------------------------------------------------
0 Linecard online C9000LC0640 C9000LC0640 9.9(0.0) 24
1 Linecard not present
2 Linecard not present C9000LC2410T
3 Linecard not present
4 Linecard not present
5 Linecard online C9000LC0640 C9000LC0640 9.9(0.0) 24
6 Linecard online C9000LC2410G C9000LC2410G 9.9(0.0) 24
7 Linecard not present
8 Linecard not present
9 Linecard not present C9000LC0640
10 Linecard online C9000-RPM-2.56T C9000-RPM-2.56T 9.9(0.0) 4
11 Linecard online C9000-RPM-2.56T C9000-RPM-2.56T 9.9(0.0) 4
-- Route Processor Modules --
Slot Status NxtBoot Version
----------------------------------------------------------------
0 active online 9.9(0.0)
1 booting
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm) Power Usage (W)
-------------------------------------------------------------------
0 0 down AC up 1536 0.0
0 1 absent
0 2 up AC up 3456 263.5
0 3 up AC up 3440 231.5
Total power: 495.0 W
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed Fan2 Speed Fan3 Speed
------------------------------------------------------------------
0 0 up up 3498 up 3501 up 3464 up 3510
0 1 up up 3510 up 3407 up 3501 up 3431
0 2 up up 3545 up 3504 up 3440 up 3440
Speed in RPM
Related
Commands
● show linecard – view the line card status.
● show rpm – view the RPM status.
show command-history
Display a buffered log of all commands all users enter along with a time stamp.
Syntax
show command-history
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
100 Control and Monitoring