CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1171

Table Of Contents

ip ospf mtu-ignore

Disable OSPF MTU mismatch detection upon receipt of database description (DBD) packets.

C9000 Series

Syntax

ip ospf mtu-ignore

To return to the default, use the no ip ospf mtu-ignore command.

Defaults Enabled.

Command Modes INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.1 Introduced on the E-Series.

ip ospf network

Set the network type for the interface.

C9000 Series

Syntax

ip ospf network {broadcast | point-to-point}

To return to the default, use the no ip ospf network command.

Parameters

broadcast Enter the keyword broadcast to designate the interface as part of a broadcast

network.

point-to-point Enter the keywords point-to-point to designate the interface as part of a

point-to-point network.

Defaults Not configured.

Command Modes ROUTER OSPF