CLI Guide

show pe system
Display information on all the system components of a port extender on a stack.
C9000 Series
Syntax
show pe pe-id system [ brief | stack-port [status | topology] | stack-unit
unit number ]
Parameters
pe-id Enter the port extender ID pe-id to view the port extender system status and
details. Range is from 0 to 255.
brief (Optional) Enter the keyword brief to view a short summary of the port extender
system status.
stack-port (Optional) Enter the keyword stack port to view the stack port information.
status (Optional) Enter the keyword status to view the status of the stack ports when
there is a PE stack configuration.
topology (Optional) Enter the keyword topology to view the topology information when
there is a PE stack configured. Topology for a PE stack can be: daisy chain or ring.
stack-unit unit
number
(Optional) Enter the keyword stack-unit and a stack unit number to view
information on a specified stack-unit in detail. Stack unit range is from 0 to 7.
Default None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage
Information
The show pe pe-id system output displays detailed summary on different hardware and software
components of all the stack units attached to a port extender. You can use the brief option to view a
short summary of the stack-units attached to a port extender. Use the stack-port status to view
the status of the stack-units attached to a port extender. The stack-port topology option allows
you to view whether the stack is forming a daisy chain or a ring topology. Use the stack-unitunit—
number option to display the detailed summary of both hardware and software components of a specific
stack-unit.
Example: pe pe-
id system
Dell#show pe 1 system
Stack MAC : 6c:c0:00:43:09:90
-- Unit 1 --
Unit Type : Management Unit
Status : online
Next Boot : online
Required Type : C1048P - 48-port GE
Current Type : C1048P - 48-port GE
Master priority : 2
Hardware Rev : 5.0
Num Ports : 52
Up Time : 22 hr, 40 min
Dell Networking OS Version : 1-0(0-4092)
Jumbo Capable : yes
POE Capable : yes
FIPS Mode : disabled
Burned In MAC : 6c:c0:00:43:09:90
PE Stacking 1265