CLI Guide

Version Description
9.13(0.0) Added the range keyword to the command.
9.9(0.0) Introduced on the C9010.
Example
The following command resets all the PEs within range 1 to 5: reset pe range 1-5 no-confirm.
The following command resets all the PEs within range 5 to 10 and also the pe-ids 1 and 3: reset pe
range 1,3,5-10 no-confirm.
reset pe schedule show
Display a list of PEs that are scheduled to be rebooted.
Syntax
reset pe schedule show
Defaults None.
Command Modes
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13(0.0) Introduced on the C9010.
Example
JobID Status Scheduled Start Time Scheduled PE's
000 Scheduled 08:59-09/19/17 0,1
001 Scheduled 23:30-09/19/17 2,3
002 Scheduled 20:30-12/29/17 5-6
reset pe unschedule
Use this command to undo the scheduled PR reboot configuration.
Syntax
reset pe unschedule job-id
Defaults None.
Parameters
job-id Enter the job ID of the scheduled PE reboot configuration that you want to undo.
Command Modes
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13(0.0) Introduced on the C9010.
1346 Port Extenders (PE)