CLI Guide

Usage
Information
When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size
does not affect messages stored in the buffer.
Related
Commands
clear logging — clears the logging buffer.
default logging buffered — returns the logging buffered parameters to the default setting.
show logging — displays the logging setting and system messages in the internal buffer.
logging console
Specify which messages are logged to the console.
C9000 Series
Syntax
logging console [level]
To return to the default values, use the default logging console command.
To disable logging to the console, use the no logging console command.
Parameters
level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters:
emergencies, alerts, critical, errors, warnings, notifications,
informational, or debugging. The default is 7 or debugging.
Defaults level = 7; size = debugging
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Related
Commands
clear logging — clears the logging buffer.
default logging console — returns the logging console parameters to the default setting.
show logging — displays the logging setting and system messages in the internal buffer.
logging coredump stack-unit
Enable coredump on a stack.
C9000 Series
Syntax
logging coredump stack-unit {0–5 | all}
Parameters
stack-unit 0–5
Enter the stack-unit id.
1630 Simple Network Management Protocol (SNMP) and Syslog