CLI Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OSCommand Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4(0.0) Introduced on the S–Series.
Usage
Information
If the maximum route limit is not specified for a VRF, then it has unlimited space that extends to the
maximum number of entries allowed for the system. This command is not applicable to the default and
management VRFs.
show ip vrf
Display information corresponding to the VRFs that are configured in the system.
C9000 Series
Syntax
show ip [vrf vrf-name]
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to display information
corresponding to that VRF..
Command Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z9000.
Example
Dell#show ip vrf
VRF-Name VRF-ID Interfaces
default 0 Te 0/0-13,18-47,
Fo 0/48,52,56,60,
Ma 0/0,
Ma 1/0,
Ma 2/0,
Ma 3/0,
Ma 4/0,
Ma 5/0,
Ma 6/0,
Ma 7/0,
Ma 8/0,
Ma 9/0,
Ma 10/0,
1780 Virtual Routing and Forwarding (VRF)