CLI Guide

• dot1x tx-period
• mac
• show dot1x cos-mapping interface
• show dot1x interface
• show dot1x profile
debug dot1x
Display 802.1X debugging information.
C9000 Series
Syntax
debug dot1x [all | auth-pae-fsm | backend-fsm | eapol-pdu] [interface
interface]
Parameters
all Enable all 802.1X debug messages.
auth-pae-fsm Enable authentication PAE FSM debug messages.
backend-fsm Enable backend FSM debug messages.
eapol-pdu Enable the EAPOL frame trace and related debug messages.
interface
interface
Restricts the debugging information to an interface. The interface option is
available only when the interface is either operationally up or dot1x related interface
configuration exists before enabling debugging for that interface.
Defaults Disabled
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series and S-Series.
dot1x auth-fail-vlan
Configure an authentication failure VLAN for users and devices that fail 802.1X authentication.
C9000 Series
Syntax
dot1x auth-fail-vlan vlan-id [max-attempts number]
To delete the authentication failure VLAN, use the no dot1x auth-fail-vlan vlan-id [max-
attempts number] command.
802.1X 195