CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

281

282

283

284

285

286

287

288

289

290

Table Of Contents

Parameters

as-path-name

Enter the name of an established AS-PATH ACL, up to 140 characters.

Defaults Not configured.

Command Modes ROUTE-MAP

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series ExaScale.

7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names

are up to 16 characters long.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.0 Introduced on the E-Series.

Commands

set as-path — adds information to the BGP AS_PATH attribute.

match community

To match routes that have a certain COMMUNITY attribute in their BGP path, configure a filter.

C9000 Series

Syntax

match community community-list-name [exact]

To delete a community match filter, use the no match community command.

Parameters

community-list-

name

Enter the name of a configured community list.

exact (OPTIONAL) Enter the keywords exact to process only those routes with this

community list name.