CLI Guide

Example
Dell#show hardware ipv6 eg-acl linecard 0 port-set 0
EID 0x000013ce: gid=0xd,
slice=0, slice_idx=0, part =0 prio=0x13ce, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
StageEgress
slice=1, slice_idx=0, part =1 prio=0x13ce, flags=0x10204,
Installed, Enabled
tcam: color_indep=0,
Offset: 1 Width: 8
DATA=0x0000003a
MASK=0x000000ff
IpType
Offset: 208 Width: 5
DATA=0x00000004
MASK=0x0000000c
L3Routable
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics=NULL
EID 0x0000130d: gid=0xd,
slice=0, slice_idx=0x1, part =0 prio=0x130d, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
StageEgress
slice=1, slice_idx=0x1, part =1 prio=0x130d, flags=0x10204,
Installed, Enabled
tcam: color_indep=0,
IpType
Offset: 208 Width: 5
DATA=0x00000004
MASK=0x0000000c
L3Routable
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics={stat id 110 slice = 0 idx=4 entries=1}{Packets}
Usage
Information
The port-set values are internal port numbers.
show hardware mac
Display information about the MAC ACLs used on a line card and port-sets.
C9000 Series
Syntax
show hardware mac {eg-acl {pe pe-id stack-unit unit-number port-set port-
pipe-id counters | linecard slot-id port-set number}| in-acl {pe pe-id
Debugging and Diagnostics 609