CLI Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series and S-Series.
ip dhcp snooping verify mac-address
Validate a DHCP packet’s source hardware address against the client hardware address field (CHADDR) in the payload.
C9000 Series
Syntax
[no] ip dhcp snooping verify mac-address
Defaults Disabled
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
7.2.1.0 Introduced on the C-Series and S-Series.
ip dhcp snooping vlan
Enable DHCP Snooping on one or more VLANs.
C9000 Series
Syntax
[no] ip dhcp snooping vlan name
Parameters
name Enter the name of a VLAN on which to enable DHCP Snooping.
Defaults Disabled
Command Modes CONFIGURATION
642 Dynamic Host Configuration Protocol (DHCP)