Release Notes

Upgrading the CPLD
The S6000-ON system with Dell Networking OS Version 9.14(2.10) requires System CPLD revision 10, Master CPLD revision 12,
and Slave CPLD revision 10.
Verify that a CPLD upgrade is required
NOTE: If your CPLD revisions are higher than the ones shown here, DO NOT make any changes. If you have questions
regarding the CPLD revision, contact technical support.
Use the following command to identify the CPLD version:
Dell#show revision
-- Stack unit 0 --
S6000 SYSTEM CPLD : 10
S6000 MASTER CPLD : 12
S6000 SLAVE CPLD : 10
Use the following command to view CPLD version that is associated with the Dell Networking OS image:
Dell#show os-version
RELEASE IMAGE INFORMATION :
---------------------------------------------------------------------
Platform Version Size ReleaseTime
S-Series:SI 9.14(2.10) 62072761 May 18 2021 09:48:25
TARGET IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
runtime 9.14(2.10) Control Processor passed
BOOT IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
boot flash 3.1.1.7 Control Processor passed
BOOTSEL IMAGE INFORMATION :
---------------------------------------------------------------------
Type Version Target checksum
boot selector 3.1.0.3 Control Processor passed
FPGA IMAGE INFORMATION :
---------------------------------------------------------------------
Card FPGA Name Version
stack-unit 0 S6000 SYSTEM CPLD 10
stack-unit 0 S6000 MASTER CPLD 12
stack-unit 0 S6000 SLAVE CPLD 10
Installing Dell Networking OS on the S6000-ON using ONIE
NOTE:
The Dell Networking OS installer package, ONIE-FTOS-SI-ON-9.14.2.10.bin, is required for installing Dell Networking
OS on S6000-ON that has only ONIE.
To upgrade the ONIE package you have installed, use one of the following two processes: zero touch (dynamic) update or
manual update.
1. Zero touch (dynamic): Copy the update ONIE installer and the DIAG installer for your system to the TFTP/
HTTP server.Configure the DHCP options using the ONIE specifications shown at the following link: http://
opencomputeproject.github.io/onie/docs/design-spec/updater.html
4