Setup Guide

Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld snooping enable
Enable MLD snooping on the switch globally.
Syntax
ipv6 mld snooping enable
To disable MLD snooping, use the no ipv6 mld snooping enable command.
Defaults Enabled on all VLAN interfaces.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld snooping explicit-tracking
Enable explicit MLD snooping tracking on an interface.
Syntax
ipv6 mld snooping explicit-tracking
To disable MLD snooping explicit tracking, use the no ipv6 mld snooping explicit-tracking
command.
Defaults Disabled.
Command Modes INTERFACE VLAN
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld snooping mrouter
Configure a Layer 2 port as a multicast router port.
Syntax
ipv6 mld snooping mrouter interface {interface interface}
Parameters
interface Enter the keyword interfaceto indicate the next-hop interface to the multicast
router.
interface Enter one of the following keywords and the interface information:
● For a null interface, enter the keyword null then the slot/port information.
The Null interface number is 0.
1030 Multicast Listener Discovery Protocol