Setup Guide

Example (with
ntp master
configuration)
Dell EMC#show ntp associations
remote vrf-Id ref clock st when poll reach delay offset disp
====================================================================================
*LOCAL(0) 0 .LOCL. 7 6 16 377 0.000 0.000
0.002
10.16.127.86 0 10.16.127.26 5 9 16 1 65.292 13829.9
0.002
10.16.127.144 0 10.16.127.26 5 6 16 1 0.829 13795.2
0.002
10.16.127.44 0 10.16.127.26 5 - 16 1 0.799 13791.5
0.002
* master (synced), # backup, + selected, - outlier, x falseticker
Dell EMC#
In the above example,
● LOCAL(0) indicates that the local machine synchronizes with itself.
● .LOCL. indicates reference clock of the NTP master.
Related
Commands
● show ntp status — displays the current NTP status.
show ntp vrf associations
Displays the NTP servers configured for the VRF instance <vrf-name>.
Syntax
show ntp [vrf] <vrf-name> associations.
Command Modes EXECEXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0) Added support for VRF.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Added IPv6 support.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
System Time and Date 1655