Dell OS9 : Users Guide : Page 283

Table 22. show interface pfc summary Command Description (continued)

Fields Description

PFC TLV Statistics: Pause Tx pkts Number of PFC pause frames transmitted.

PFC TLV Statistics: Pause Rx pkts Number of PFC pause frames received

The following example shows the show interface pfc statistics command.

DellEMC#show interfaces te 1/1 pfc statistics

Interface TenGigabitEthernet 1/1

Interface Priority Rx XOFF Frames Rx Total Frames Tx Total

Frames

-----------------------------------------------------------------------------------------

------

Te 1/1 P0 0 0 0

Te 1/1 P1 0 0 0

Te 1/1 P2 0 0 0

Te 1/1 P3 0 0 0

Te 1/1 P4 0 0 0

Te 1/1 P5 0 0 0

Te 1/1 P6 0 0 0

Te 1/1 P7 0 0 0

The following example shows the show interface ets summary command.

DellEMC(conf)#do show interfaces te 1/1 ets summary

Interface TenGigabitEthernet 1/1

Max Supported TC is 4

Number of Traffic Classes is 8

Admin mode is on

Admin Parameters :

------------------

Admin is enabled

PG-grp Priority# BW-% BW-COMMITTED BW-PEAK TSA

% Rate(Mbps) Burst(KB) Rate(Mbps) Burst(KB)

----------------------------------------------------------------------------------

0 3 25 - - - - ETS

1 4 25 - - - - ETS

2 0,1,2,5,6,7 50 - - - - ETS

3 - - - - - -

4 - - - - - -

5 - - - - - -

6 - - - - - -

7 - - - - - -

Remote Parameters :

-------------------

Remote is disabled

Local Parameters :