Users Guide

Displaying FIP Snooping Information
Use the following show commands to display information on FIP snooping.
Table 30. Displaying FIP Snooping Information
Command Output
show fip-snooping sessions [interface vlan
vlan-id]
Displays information on FIP-snooped sessions on all VLANs or
a specified VLAN, including the ENode interface and MAC
address, the FCF interface and MAC address, VLAN ID, FCoE
MAC address and FCoE session ID number (FC-ID), worldwide
node name (WWNN) and the worldwide port name (WWPN).
show fip-snooping config
Displays the FIP snooping status and configured FC-MAP
values.
show fip-snooping enode [enode-mac-address]
Displays information on the ENodes in FIP-snooped sessions,
including the ENode interface and MAC address, FCF MAC
address, VLAN ID and FC-ID.
show fip-snooping fcf [fcf-mac-address]
Displays information on the FCFs in FIP-snooped sessions,
including the FCF interface and MAC address, FCF interface,
VLAN ID, FC-MAP value, FKA advertisement period, and
number of ENodes connected.
clear fip-snooping database interface vlan
vlan-id {fcoe-mac-address | enode-mac-
address | fcf-mac-address}
Clears FIP snooping information on a VLAN for a specified
FCoE MAC address, ENode MAC address, or FCF MAC
address, and removes the corresponding ACLs generated by
FIP snooping.
show fip-snooping statistics [interface vlan
vlan-id| interface port-type port/slot |
interface port-channel port-channel-number]
Displays statistics on the FIP packets snooped on all
interfaces, including VLANs, physical ports, and port channels.
clear fip-snooping statistics [interface
vlan vlan-id | interface port-type port/slot
| interface port-channel port-channel-
number]
Clears the statistics on the FIP packets snooped on all VLANs,
a specified VLAN, or a specified port interface.
show fip-snooping system
Displays information on the status of FIP snooping on the
switch (enabled or disabled), including the number of FCoE
VLANs, FCFs, ENodes, and currently active sessions.
show fip-snooping vlan
Displays information on the FCoE VLANs on which FIP
snooping is enabled.
The following example shows the show fip-snooping sessions command.
DellEMC#show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
aa:bb:cc:00:00:00 Te 1/42 aa:bb:cd:00:00:00 Te 1/43 100
FCoE MAC FC-ID Port WWPN Port WWNN
0e:fc:00:01:00:01 01:00:01 31:00:0e:fc:00:00:00:00 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:02 01:00:02 41:00:0e:fc:00:00:00:00 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:03 01:00:03 41:00:0e:fc:00:00:00:01 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:04 01:00:04 41:00:0e:fc:00:00:00:02 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:05 01:00:05 41:00:0e:fc:00:00:00:03 21:00:0e:fc:00:00:00:00
The following table describes the show fip-snooping sessions command fields.
332
FIP Snooping