Administrator Guide

Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage
Information
If no ports are GVRP participants, the message output changes from GVRP Participants running
on <port_list> to GVRP Participants running on no ports.
Example
DellEMC# show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
----------------------------------------------
Te 3/1/1 Disabled No
Te 3/1/2 Enabled No
Te 3/1/3 Disabled No
Te 3/1/4 Disabled No
Te 3/2/1 Disabled No
Te 3/2/2 Disabled No
Te 3/2/3 Disabled No
Te 3/2/4 Disabled No
DellEMC# show gvrp brief
Related
Commands
● show gvrp statistics — display the GVRP statistics.
show gvrp statistics
Display the GVRP configuration statistics.
Syntax
show gvrp statistics {interface interface | summary}
Parameters
interface
interface
(OPTIONAL) Enter the keyword interface then one of the interface keywords
and the interface information:
620 GARP VLAN Registration (GVRP)