Release Notes

Synopsis: The switch may encounter an exception when an incorrect length field
is specified in a TACACS packet.
Release Notes: The switch may encounter an exception when an incorrect length field
is specified in a TACACS packet.
Workaround: None
Known Issues
Known issues are reported using the following definitions.
Category
Description
PR# Problem Report number that identifies the issue.
Severity
S1 — Crash: A software crash occurs in the kernel or a running process that requires a restart of AFM,
the router, switch, or process.
S2 — Critical: An issue that renders the system or a major feature unusable, which can have a pervasive
impact on the system or network, and for which there is no work-around acceptable to the customer.
S3 — Major: An issue that affects the functionality of a major feature or negatively effects the network
for which there exists a work-around that is acceptable to the customer.
S4 — Minor: A cosmetic issue or an issue in a minor feature with little or no network impact for which
there might be a work-around.
Synopsis Synopsis is the title or short description of the issue.
Release Notes Release Notes description contains more detailed information about the issue.
Work around
Work around describes a mechanism for circumventing, avoiding, or recovering from the issue. It might
not be a permanent solution.
Issues listed in the “Closed Caveats” section should not be present, and the work-around is unnecessary,
as the version of code for which this release note is documented has resolved the caveat.
Known S6010-ON 9.14(2.10) Software Issues
The following caveats are open in Dell Networking OS version 9.14(2.10):
None
Upgrading the ONIE Package for the S6010-ON System
NOTE:
The Dell Networking OS installer package, ONIE-FTOS-SI-ON-9.14.2.10.bin, is required for installing Dell Networking
OS on S6000-ON that has only ONIE.
● Zero touch (dynamic): Copy the update ONIE installer for your system to the TFTP/HTTP server. Configure the DHCP
options using the ONIE specifications shown at the following link: https://github.com/opencomputeproject/onie/wiki/
Design-Spec-SW-Updating-ONIE.
● Manual: Copy the image onto the TFTP/HTTP servers and boot ONIE. Update the ONIE using the onie-self-update
command, then download and run an ONIE updater image (onie-updater-x86_64-dell_s6010_c2538-r0). The supported URL
types are: HTTP, FTP, TFTP, and FILE.
To upgrade ONIE, perform the following steps:
1. Reboot the system. During the reboot process, the system displays the following message prompting you to press the Esc
key in order to stop the auto-boot process:
Press Esc to stop autoboot ... 5
Grub 2.02~beta2 (Dell EMC Inc)
6