White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

1521

Table Of Contents

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.4(0.0) Introduced on the S-Series and Z9000.

Usage

Information

Use this command to bind an SNMP agent to a VRF. The SNMP agent processes the requests from the

interfaces that belong to the specified VRF. If no VRF is specified, then the default VRF is used.

Commands

● show snmp user — display the information configured on each SNMP user name.

snmp-server view

Configure an SNMPv3 view.

Syntax

snmp-server view view-name oid-tree {included | excluded}

To remove an SNMPv3 view, use the no snmp-server view view-name oid-tree {included

| excluded} command.

Parameters

view-name

Enter the name of the view (not to exceed 20 characters).

oid-tree

Enter the OID sub tree for the view (not to exceed 20 characters).

included (OPTIONAL) Enter the keyword included to include the MIB family in the view.

excluded (OPTIONAL) Enter the keyword excluded to exclude the MIB family in the view.

Defaults none