White Papers

Usage
Information
The passwords are stored encrypted in the running configuration.
enable
Enable communication with the SupportAssist server.
Syntax
enable
To disable communication to a specific SupportAssist server, use the no enable command.
Defaults Enabled
Command Modes SUPPORTASSIST SERVER
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Related
Commands
● server — configure the name of the remote SupportAssist server.
url
Configure the URL to reach the SupportAssist remote server.
Syntax
url uniform-resource-locator
To delete the URL for the server, use the no url command.
Parameters
uniform-
resource-locator
Enter a text string for the URL using one of the following formats:
● http://[username:password@]<hostip>:<portNum>/<filepath>
● https://[username:password@]<hostip>:<portNum>/<filepath>
NOTE: The host IP for the server may be specified as an IPv4 address, an
IPv6 address or as a DNS hostname. If using the DNS hostname, the DNS
resolver will need to be configured and enabled.
Command Modes SUPPORTASSIST SERVER
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
1618 SupportAssist