White Papers

ethact=eTSEC1
ethaddr=00:01:E8:82:09:B2
serverip=10.11.9.4
primary_boot=f10boot tftp://10.11.9.2/si-S4810-40g
secondary_boot=f10boot flash0
default_boot=f10boot tftp://192.168.128.1/FTOS-SC-1.2.0.0E3.bin
gatewayip=10.11.192.254
ipaddr=10.11.198.114
netmask=255.255.0.0
mgmtautoneg=true
mgmtspeed100=true
mgmtfullduplex=true
stdin=serial
stdout=serial
stderr=serial
Environment size: 1002/8188 bytes
=>
Usage
Information
● ethaddr=00:01:E8:82:09:B2 is the MAC address.
● primary_boot=f10boot tftp://10.11.9.2/si-S4810-40g, secondary_boot=f10boot
flash0, and default_boot=f10boot tftp://192.168.128.1/FTOS-SC-1.2.0.0E3.bin
are the boot variables.
● gatewayip=10.11.192.254 is the default gateway address.
● ipaddr=10.11.198.114 is the management IP address.
reset
Reload the system.
Syntax
reset
Command Modes uBoot
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Usage
Information
Save your changes before resetting the system or all your changes will be lost.
save
Save configurations created in uBoot.
Syntax
save
Command Modes uBoot
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version 8.3.19.0 Introduced on the S4820T.
u-Boot 1641