Administrator Guide

connected
Enter the keyword connected to redistribute routes from physically connected
interfaces.
static
Enter the keyword static to redistribute manually configured routes.
metric metric-
value
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
The default is 20.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then the OSPFv3 link state type
of 1 or 2 for default routes. The values are:
● 1 for a type 1 external route
● 2 for a type 2 external route
The default is 2.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established
route map. If the route map is not configured, the default is deny (to drop all
routes).
tag tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPFv3.
The range is from 0 to 4294967295
The default is 0.
Defaults Not configured.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced support for OSPFv3 on the S4810 and Z9000.
8.3.19.0 Introduced on the S4820T.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
To redistribute the default route (x:x:x:x::x), use the default-information originate command.
Related
Commands
default-information originate – configures default external route into OSPFv3.
1246 Open Shortest Path First (OSPFv2 and OSPFv3)