Administrator Guide

memory usage on all line card CPUs. Enter linecard summary to display a
summary of memory usage on all line card CPUs.
pe pe-id Enter the keyword pe and the port extender (PE) ID.pe-id. Range is from 0 to 255.
NOTE: The pe option is only visible when the feature extended bridge is
enabled.
stack-unit unit-
number
Enter the keyword stack-unit and the stack unit-number. Range is from 0 to 7.
Command Modes
● EXEC
● EXEC Privilege
Defaults Display detailed information on memory usage on all switch CPUs (Control Processor, Route Processor,
Port Extender, and Line Cards).
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9 (0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.2 Introduced on the E-Series ExaScale E600i.
8.1.1.0 Introduced on the E-Series ExaScale E1200i.
7.5.1.0 Introduced on the C-Series.
Usage
Information
show
processes
memory
output Field
Description
Total: Total system memory available
MaxUsed: Total maximum memory used ever (history indicated with a time stamp)
CurrentUsed: Total memory currently in use
CurrentFree: Total system memory available
SharedUsed: Total used shared memory
SharedFree: Total free shared memory
PID Process ID
Process Process Name
ResSize Actual resident size of the process in memory
Size Process test, stack, and data size
Allocs Total dynamic memory allocated
Frees Total dynamic memory freed
Max Maximum dynamic memory allocated
Current Current dynamic memory in use
Control and Monitoring 127