Administrator Guide

3) The proxy-gateway LLDP configuration is applied.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway lldp
proxy-gateway peer-timeout
Enable the VLT node to timeout the transmission of peer’s mac address when the VLT peer is down.
C9000 Series
Syntax
[no] peer-timeout value
Parameters
value Enter the timeout value in seconds. The range is from 1 to 65535.
Command Modes VLT DOMAIN PROXY GW LLDP
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Removed the default value on the S-Series and Z-Series.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL Switch.
Usage
Information
In a square VLT topology with a single link connecting to the remote peers, If a VLT peer goes down, the
local VLT node must be prompted to stop transmitting it’s peer’s MAC address. You can configure the
peer-timeout value command to stop the local VLT node from transmitting the peer MAC address
within the configured peer timeout value. The default timeout value is infinity. You must enable the vlt-
peer-mac transmit to configure a peer time out value.
Example
Dell(conf-vlt-domain-proxy-gw-lldp)# peer-timeout 5
proxy-gateway static
Enable the proxy-gateway feature using static configurations.
C9000 Series
Syntax
[no] proxy-gateway static
Command Modes VLT DOMAIN
Command
History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage
Information
When proxy-gateway static configuration is added, the setting is saved in the Layer 2 module. When you
remove the static proxy gateway configuration, each proxy-gateway static mac configured is
deleted from the Layer 2 module.
1756 Virtual Link Trunking (VLT)