Administrator Guide

Usage
Information
After you allocate FP blocks of CAM to ACL VLAN operation, you must reboot the switch to enable ACL
VLAN optimization.
The following table describes the output fields of the show cam-acl-vlan command:
Table 1. show cam-acl-vlan Command Description
Field Description
Chassis Vlan Cam ACL Details about the CAM blocks allocated for ACLs
for various VLAN operations at a system-wide,
global level.
Stack Unit <number> Details about the CAM blocks allocated for ACLs
for various VLAN operations for a particular stack
unit.
Current Settings(in block sizes) Information about the number of FP blocks that
are currently in use or allocated.
VlanOpenFlow Number of FP blocks for VLAN open flow
operations.
VlanIscsi Number of FP blocks for VLAN internet small
computer system interface (iSCSI) counters.
VlanHp Number of FP blocks for VLAN high performance
processes.
VlanFcoe Number of FP blocks for VLAN Fiber Channel
over Ethernet (FCoE) operations.
VlanAclOpt Number of FP blocks for ACL VLAN optimzation
feature.
Example
Dell#show cam-acl-vlan
-- Chassis Vlan Cam ACL --
Current Settings(in block sizes)
VlanOpenFlow : 0
VlanIscsi : 2
VlanHp : 1
VlanFcoe : 1
VlanAclOpt : 0
-- Stack unit 0 --
Current Settings(in block sizes)
VlanOpenFlow : 0
VlanIscsi : 2
VlanHp : 1
VlanFcoe : 1
VlanAclOpt : 0
show running config acl-vlan-group
Display the running configuration of ACL VLAN groups.
C9000 Series
Syntax
show running config acl-vlan-group group-name
Parameters
group-name
Display the specified ACL VLAN group (140 characters maximum).
Default None
260 Access Control Lists (ACL)