Administrator Guide

● If the rt with the additive option comes after soo, rt adds the communities soo sets.
Related
Commands
set extcommunity rt — sets the extended community route origins using the route-map.
show ip bgp ipv4 extcommunity-list
To display the IPv4 routes matching the extended community list name, use this feature.
C9000
Syntax
show ip bgp [ipv4 [multicast | unicast] | ipv6 unicast] extcommunity-list
name
Parameters
multicast Enter the keyword multicast to display the multicast route information.
unicast Enter the keyword unicast to display the unicast route information.
ipv6 unicast Enter the keywords ipv6 unicast to display the IPv6 unicast route information.
name (OPTIONAL) Enter the name of the extcommunity-list.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
Usage
Information
If there is a type or sub-type that is not well-known, it is displayed as:TTSS:XX:YYYY.
Where TT is type, SS is sub-type displayed in hexadecimal format, XX:YYYY is the value divided into 2–
byte and 4-byte values in decimal format. This format is consistent with other vendors.
For example, if the extended community has type 0x04, sub-type 0x05, value 0x20 00 00 00 10 00, it
displays as:0x0405:8192:4096.
Non-transitive extended communities are marked with an asterisk.
Example
Dell#show ip bgp ipv4 multicast extcommunity-list
BGP routing table entry for 192.168.1.0/24, version 2
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
100.100.1.2 (2.4.0.1) Best
AS_PATH : 200
Next-Hop : 100.100.1.2, Cost : 0
Origin IGP, Metric 4294967295 (Default), LocalPref 100, Weight 0,
external
Communities :
Border Gateway Protocol 435