Administrator Guide

• show cpu-traffic-stats
• show cpu-interface-stats
• show debugging
• show environment
• show inventory
• show linecard
• show login statistics
• show memory
• show processes cpu
• show processes ipc
• show processes ipc flow-control
• show processes memory
• show reset-reason
• show rpm
• show software ifm
• show system linecard
• show tech-support
• show util-threshold cpu
• show util-threshold memory
• show version
• telnet
• terminal length
• traceroute
• undebug all
• upload trace-log
• util-threshold cpu
• util-threshold memory
• virtual-ip
• write
asf-mode
Enable the transmission of Alternate Store and Forward (ASF) packets as soon as a threshold is reached.
C9000 Series
Syntax
asf-mode linecard {slot-id | all}
To return to standard Store and Forward mode, use the no asf-mode linecard command.
Parameters
linecard slot-id Enter the slot ID of a switch line card. The range of slot IDs is from 0 to 11. Enter
all to enable ASF mode on all line cards on the switch.
Defaults Not configured
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
60 Control and Monitoring