Administrator Guide

• show config
• show garp timers
• show gvrp
• show gvrp statistics
clear gvrp statistics
Clear GVRP statistics on an interface.
C9000 Series
Syntax
clear gvrp statistics interface interface
Parameters
interface
interface
Enter the following keywords and slot/port or number information:
● For a Port Channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related
Commands
show gvrp statistics — displays the GVRP statistics.
debug gvrp
Enable debugging on GVRP.
C9000 Series
Syntax
debug gvrp {config | events | pdu}
To disable debugging, use the no debug gvrp {config | events | pdu} command.
Parameters
config Enter the keyword config to enable debugging on the GVRP configuration.
GARP VLAN Registration (GVRP) 689