Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

811

812

813

814

815

816

817

818

819

820

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Added support for VRF. Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.2(0.2) Introduced on the Z9000.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

6.3.1.0 Introduced.

debug isis snp-packets

To debug IS-IS complete sequence number PDU (CSNP) and partial sequence number PDU (PSNP) packets, enable debugging

on a specific interface and provides diagnostic information.

C9000 Series

Syntax

debug isis snp-packets [interface][vrf vrf-name]

To turn off debugging, use the no debug isis [vrf vrf-name] snp-packets [interface]

command.

Parameters

interface

(OPTIONAL) Identifies the interface type slot/port as one of the following:

● For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet then

the slot/port information.

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

slot/port information.

● For a port channel interface, enter the keywords port-channel then a

number.

● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

vrf

vrf-name

(Optional) Enter the keyword vrf followed by the name of the VRF to enable

debugging information on ISIS for CSNP/PSNP packets tied to that VRF. The

command displays the SNP (CSNP/PSNP) related debugging information.

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.