Administrator Guide

nlbclusteracl number | ipv4pbr number | iscsioptaclnumber | openflow number
| vrfv4ac numberl ]}}
Parameters
default Use the default CAM profile settings and set the CAM as follows:
● L3 ACL (ipv4acl): 4
● L2 ACL(l2acl): 5
● IPv6 L3 ACL (ipv6acl): 0
● L3 QoS (ipv4qos): 2
● L2 QoS (l2qos): 1
● OpenFlow: 0 (disabled)
● FCoE (fcoeacl): 0 (disabled)
● iSCSI Optimization (iscsioptacl): 0 (disabled)
● L2 PT : 0
● IP-MAC ACL : 0
● Vman QoS : 0
● ECFM ACL: 0
● IPv4 PBR : 0
● VRFv4 ACL : 0
● FedGov ACL : 0
● NLB Cluster ACL : 0
l2acl number
Allocate space to each CAM region.
Enter the CAM profile name then the amount for CAM space allocation. The total
space allocated must be equal to 12. The IPv6 ACL range must be a factor of 2.
Enter l2acl and the FP block number for L2 ACL. The FP block number range is
from 1 to 8.
● 4: Creates 242 entries for use by the OpenFlow controller (256 total entries
minus the 14 entries reserved for internal functionality)
● 8: Creates 498 entries for use by the OpenFlow controller (512 total entries
minus the 14 entries reserved for internal functionality)
ipv4acl number
Enter ipv4acl and the FP block number for IPv4. The FP block number range is
from 0 to 8.
ipv6acl number
Enter ipv6acl and the FP block number for IPv6. The FP block number range is
from 0 to 4 (multiples of 2).
ipv4qos number
Enter ipv4qos and the FP block number for IPv4–QoS. The FP block number
range is from 0 to 8.
l2qos number
Enter l2qos and the FP block number for L2–QoS. The FP block number range is
from 1 to 8.
l2pt number
Enter l2pt and the FP block number for L2–Protocol tunneling. The FP block
number range is from 0 to 1.
ipmacacl number
Enter ipmacacl and the FP block number for IP-MAC ACL. The FP block number
range is from 0 to 6.
vman-qos
number
Enter vman-qos and the FP block number for Vman QoS. The FP block number
range is from 0 to 6.
ecfmacl number
Enter ecfmacl and the FP block number for ECFM ACL. The FP block number
range is from 0 to 5.
fcoeacl number
Enter fcoeacl and the FP block number for FCoE ACL. The FP block number
range is 0 to 6.
954 IPv6 Access Control Lists (IPv6 ACLs)