API Guide

PE-ID assigned: 200
Status: offline
System Mac: f8:b1:56:00:02:8a
PE Up Time: 00:00:00
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 0/22(A),Te 0/23(A)
Cascade LAG: Po 458(Up)
------------------------------------------------------------------------
Stack-id Status Reason Type UnitMac No. of Ports
------------------------------------------------------------------------
2 error SVM C1048P 00:00:00:00:00:00 52
Dell#
Dell#show pe errors
PE-id: 200
PE MAC: f8:b1:56:00:02:8a
PE Unit Errors:
PE Unit:2, Error Reason: SW Mismatch
Dell#
The PE goes for an auto-synch to get upgraded to the version that matches the CB. Once synched, the PE comes up online.
Dell#Apr 3 05:52:49: %RPM1-P:CP %DOWNLOAD-6-UPGRADE: PE 200 auto upgrade result - upgrade
success, initiating reset.
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/22
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/23
Apr 3 05:52:52: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Po 458
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/23
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te 0/23
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/22
Apr 3 05:54:35: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 0/23
Apr 3 05:54:57: %RPM1-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:02:8a is detected on
cascade port:TenGigabitEthernet 0/22.
Apr 3 05:54:57: %RPM1-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Po 458
Apr 3 05:54:57: %RPM1-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:02:8a is detected on
cascade port:TenGigabitEthernet 0/23.
Apr 3 05:55:01: %RPM1-P:CP %BRM-5-PE_UNIT_UP: PE:200 Unit:2 Unit MAC:f8:b1:56:00:02:8a is
operationally up.
Apr 3 05:55:01: %RPM1-P:CP %BRM-5-PE_UP: PE:200 MAC:f8:b1:56:00:02:8a is operationally up.
Apr 3 05:55:06: %RPM1-P:CP %POEMGR-5-POE_CONTROLLER_FW_MISMATCH: POE Controller FW Version
mismatch reported in port extender 200 stack unit 2
Apr 3 00:41:00: %PE200-C1048P:2 %POLLMGR-2-USER_FLASH_STATE: USB flash disk missing in
'usbflash:'
Apr 3 00:41:00: %PE200-UNIT2-U:CP %RAM-6-ELECTION_ROLE: Stack-unit 2 is transitioning to
Management Stack-unit.
Apr 3 00:41:00: %PE200-UNIT2-M:CP %CHMGR-5-CHMCANNOTDO: Unable to read RPM 0 mfg eeprom -
not programmed?
Apr 3 00:41:00: %PE200-UNIT2-M:CP %CHMGR-5-CHMCANNOTDO: Unable to read chassis mfg eeprom
- not programmed?
Apr 3 00:41:01: %PE200-UNIT2-M:CP %CHMGR-5-STACKUNIT_DETECTED: stack-unit 2 present
Apr 3 00:41:01: %PE200-UNIT2-M:CP %CHMGR-5-CHECKIN: Checkin from stack-unit 2 (type
C1048P, 52 ports)
Apr 3 00:41:01: %PE200-C1048P:2 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed changed to 60 % of
the full speed
Apr 3 00:41:01: %PE200-C1048P:2 %CHMGR-2-FAN_SPEED_CHANGE: Fan speed changed to 75 % of
the full speed
Apr 3 00:41:01: %PE200-UNIT2-M:CP %RAM-5-STACKUNIT_STATE: Stack-unit 2 is in Active State.
Apr 3 00:41:01: %PE200-UNIT2-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up:
Te 2/1
Apr 3 00:41:01: %PE200-UNIT2-M:CP %IFMGR-5-ASTATE_UP: Changed interface Admin state to up:
Te 2/2
Apr 3 00:41:01: %PE200-UNIT2-M:CP %CHMGR-5-STACKUNIT_UP: stack-unit 2 is up
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-5-PEM_INSERTED: Power entry module 0 of unit 2 is
inserted
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-0-PS_UP: Power supply 0 in unit 2 is up
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-5-PEM_REMOVED: Power entry module 1 of unit 2 is
absent
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-5-FANTRAY_INSERTED: Fan tray 0 of Unit 2 is
inserted
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-2-SYSTEM_READY: System ready
Apr 3 00:41:02: %PE200-UNIT2-M:CP %CHMGR-4-TEMP_STATUS_CHANGE: Unit 2 temperature state
Port Extenders (PEs)
689