CLI Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1341

Table Of Contents

● 7 – implies that the key is encrypted and hidden.

key

Enter a string that is the key to be exchanged between the switch and the dynamic

authorization client. The key can be up to 42 characters long.

Command Modes

● CONF-DYNAMIC-AUTH

Usage

Information

● It is possible to configure more than one dynamic authorization clients Duplicate (ipv4-addr or ipv6-

addr or host-name) configurations are not allowed.

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

The following is a list of the Dell EMC Networking OS version history for this command.

Version Description

9.14(1.0) Introduced on the S4810 and S4820T.

9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000,

S6010–ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FM-IOM, and

MXL.

client-key

Configures global shared key for the trusted DAC clients.

Syntax

client—key [encryption-type] key

To remove the shared key configuration, enter the no client-key command.

Defaults None.

Parameters

encryption-type: (OPTIONAL) Enter either 0 or 7 as the encryption type for the key entered. The

options are:

● 0 — is the default and means the key is not encrypted and stored as clear text.

● 7 — means that the key is encrypted and hidden.

key

Enter a string that is the key to be exchanged between the switch and RADIUS

servers. It can be up to 42 characters long.