Connectivity Guide

Version Description
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original Command
Usage
Information
After entering the banner login command, type one or more spaces and a delineator character. Enter the
banner text then the second delineator character. When the user is connected to the router, if a message
of the day banner is configured, it displays first. If no message of the day banner is configured, the login
banner and prompt appear. After the user has logged in, the banner EXEC (if configured) displays.
Example
DellEMC(conf)# banner exec ?
LINE c banner-text c, where 'c' is a delimiting character
DellEMC(conf)# banner exec %
Enter TEXT message. End with the character '%'.
This is the banner%
DellEMC(conf)# end
DellEMC# exit
2d18h1m: %STKUNIT1-M:CP %SEC-5-LOGOUT: Exec session is terminated on
console
This is the banner
Dell con0 now available
Press RETURN to get started.
2d18h2m: %STKUNIT1-M:CP %SEC-5-LOGIN_SUCCESS: Login successful on console
This is the banner
DellEMC>
Related
Commands
● line — enables and configures the console and virtual terminal lines to the system.
banner login
Set a message of the day banner to appear after logging on to the system.
Syntax
banner login {acknowledgement | keyboard-interactive | c line c}
Enter no banner login to delete the banner text. Enter no banner login keyboard-
interactive to automatically go to the banner message prompt (does not require a carriage return).
Parameters
keyboard-
interactive
Enter the keyboard-interactive keyword and then press Enter (carriage
return) to retrieve the message banner prompt.
acknowledgemen
t
Enter the acknowledgement keyword to require a positive acknowledgement
from the user while logging in to the system.
c Enter a delineator character to specify the start and end of the text banner. You
cannot use the delineator character in the banner message.
line Enter text string for your text banner message, with a maximum of 50 lines and up
to 255 characters per line.
Defaults No banner is configured and a carriage return (CR) is required when creating a banner.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Control and Monitoring 87