Glossary

Before executing any CLI command to perform file operations, you must first mount the NFS file system to a mount-point on
the device. Since multiple mount-points exist on a device, it is mandatory to specify the mount-point to which you want to load
the system. The /f10/mnt/nfs directory is the root of all mount-points.
To mount an NFS file system, perform the following steps:
Table 4. Mounting an NFS File System
File Operation Syntax
To mount an NFS file system:
mount nfs rhost:path mount-
point username password
The foreign file system remains mounted as long as the device is up and does not reboot. You can run the file system commands
without having to mount or un-mount the file system each time you run a command. When you save the configuration using the
write command, the mount command is saved to the startup configuration. As a result, each time the device re-boots, the
NFS file system is mounted during start up.
Table 5. Forming a copy Command
Location source-file-url Syntax destination-file-url Syntax
For a remote file location:
NFS File System
copy nfsmount://{<mount-
point>}/filepath/filename}
username:password
tftp://{hostip | hostname}/
filepath/filename
Important Points to Remember
● You cannot copy a file from one remote system to another.
● You cannot copy a file from one location to the same location.
● When copying to a server, you can only use a hostname if a domain name server (DNS) server is configured.
Example of Copying a File to current File System
DellEMC#copy tftp://10.16.127.35/dv-maa-test nfsmount://
Destination file name [dv-maa-test]:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!.!
44250499 bytes successfully copied
DellEMC#
DellEMC#copy ftp://10.16.127.35 nfsmount:
Source file name []: test.c
User name to login remote host: username
Example of Logging in to Copy from NFS Mount
DellEMC#copy nfsmount:///test flash:
Destination file name [test]: test2
!
5592 bytes successfully copied
DellEMC#
DellEMC#copy nfsmount:///test.txt ftp://10.16.127.35
Destination file name [test.txt]:
User name to login remote host: username
Password to login remote host:
!
Example of Copying to NFS Mount
DellEMC#copy flash://test.txt nfsmount:///
Destination file name [test.txt]:
!
15 bytes successfully copied
DellEMC#copy flash://test/capture.txt.pcap nfsmount:///
Destination file name [test.txt]:
!
15 bytes successfully copied
DellEMC#copy flash://test/capture.txt.pcap nfsmount:///username/snoop.pcap
Getting Started
49