Glossary

MIB Support for LAG
Dell EMC Networking provides a method to retrieve the configured LACP information (Actor and Partner). Actor (local
interface) is to designate the parameters and flags pertaining to the sending node, while the term Partner (remote interface)
is to designate the sending node’s view of its peer parameters and flags. LACP provides a standardized means for exchanging
information, with partner systems, to form a link aggregation group (LAG). The following table lists the related MIB objects:
Table 119. MIB Objects for LAG
MIB Object OID Description
lagMIB 1.2.840.10006.300.43 Contains information about link
aggregation module for managing
802.3ad.
lagMIBObjects 1.2.840.10006.300.43.1
dot3adAgg 1.2.840.10006.300.43.1.1
dot3adAggTable 1.2.840.10006.300.43.1.1.1 Contains information about every
Aggregator that is associated with a
system.
dot3adAggEntry 1.2.840.10006.300.43.1.1.1.1 Contains a list of Aggregator parameters
and indexed by the ifIndex of the
Aggregator.
dot3adAggMACAddress 1.2.840.10006.300.43.1.1.1.1.1 Contains a six octet read–only value
carrying the individual MAC address
assigned to the Aggregator.
dot3adAggActorSystemPriority 1.2.840.10006.300.43.1.1.1.1.2 Contains a two octet read–write value
indicating the priority value associated
with the Actor’s system ID.
dot3adAggActorSystemID 1.2.840.10006.300.43.1.1.1.1.3 Contains a six octet read–write MAC
address value used as a unique identifier
for the system that contains the
Aggregator.
dot3adAggAggregateOrIndividual 1.2.840.10006.300.43.1.1.1.1.4 Contains a read–only boolean value
(True or False) indicating whether the
Aggregator represents an Aggregate or
an Individual link.
dot3adAggActorAdminKey 1.2.840.10006.300.43.1.1.1.1.5 Contains a 16–bit read–write value
which is the current administrative key.
dot3adAggActorOperKey 1.2.840.10006.300.43.1.1.1.1.6 Contains a 16–bit read–write value
which is the operational key.
dot3adAggPartnerSystemID 1.2.840.10006.300.43.1.1.1.1.7 Contains a six octet read–only MAC
address value consisting of an unique
identifier for the current Protocol
partner of the Aggregator.
dot3adAggPartnerSystemPriority 1.2.840.10006.300.43.1.1.1.1.8 Contains a two octet read–only
value that indicates the priority value
associated with the Partner’s system ID.
dot3adAggPartnerOperKey 1.2.840.10006.300.43.1.1.1.1.9 Contains the current operational value
of the key for the Aggregator’s current
protocol partner.
dot3adAggCollectorMaxDelay 1.2.840.10006.300.43.1.1.1.1.10 Contains a 16–bit read–write attribute
defining the maximum delay, in tens of
microseconds, that may be imposed by
the frame collector between receiving a
frame from an Aggregator Parser, and
880 Simple Network Management Protocol (SNMP)