Install Guide

Usage
Information
When you use the access-class access-list-name command without specifying the ipv4 or
ipv6 attribute, both IPv4 as well as IPv6 rules that are defined in that ACL are applied to the terminal.
This method is a generic way of configuring access restrictions.
To be able to filter access exclusively using either IPv4 or IPv6 rules, use either the ipv4 or ipv6
attribute along with the access-class access-list-name command. Depending on the attribute
that you specify (ipv4 or ipv6), the ACL processes either IPv4 or IPv6 rules, but not both. Using this
configuration, you can set up two different types of access classes with each class processing either IPv4
or IPv6 rules separately.
However, if you already have configured generic IP ACL on a terminal line, then you cannot further apply
IPv4 or IPv6 specific filtering on top of this configuration. Because, both IPv4 and IPv6 access classes are
already configured on this terminal line. Before applying either IPv4 or IPv6 filtering, first undo the generic
configuration using the no access-class access-list-name command.
Similarly, if you have configured either IPv4 or IPv6 specific filtering on a terminal line, you cannot
apply generic IP ACLs on top of this configuration. Before applying the generic ACL configuration, first
undo the existing configuration using the no access-class access-list-name [ipv4 | ipv6]
command.
clear counters ip access-group
Erase all counters maintained for access lists.
Syntax
clear counters ip access-group [access-list-name]
Parameters
access-list-name (OPTIONAL) Enter the name of a configured access-list, up to 140 characters.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Increase the name string to accept up to 140 characters. Prior to 7.8.1.0, names
were up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
188 Access Control Lists (ACL)