Reference Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1001

Table Of Contents

Defaults Enabled

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

8.3.12.0 Introduced on the S4810.

8.4.1.0 Introduced.

Usage

Information

To disable the attempt to track the reachability of next-hop after the configured refresh interval, set the

refresh interval as 0.

Commands

● show track – display information about tracked objects, including configuration, current state, and

clients which track the object.

● track ip route metric threshold – configure object tracking on the threshold of an IPv4 route metric.

track resolution ip route

Configure the protocol-specific resolution value used to scale an IPv4 route metric.

Syntax

track resolution ip route {isis resolution-value | ospf resolution-value}

To return to the default setting, use the no track object-id command.

Parameters

object-id

Enter the ID number of the tracked object. The range is 1 to 500.

isis

resolution-

value

Enter the resolution used to convert the metric in the routing table for ISIS routes

to a scaled metric.

ospf