Reference Guide

Te 1/1/1 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/1 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
Te 1/1/2 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/3 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/4 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/5 3 2 0 0
4 2 0 0
5 2 0 0
6 2 0 0
Te 1/1/8 3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
DellEMC#
show storm-control unknown-unicast
Display the storm control unknown-unicast configuration.
Syntax
show storm-control unknown-unicast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display the interface specific
storm control configuration:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
● For a port channel interface, enter the keywords port-channel then a
number.
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
1524 Storm Control