Reference Guide

BOOTSEL IMAGE INFORMATION :
---------------------------------------------------
Type Version Target checksum
boot selector 3.1.0.2 Control Processor passed
FPGA IMAGE INFORMATION :
----------------------------------------
Card FPGA Name Version
Stack-unit 0 S6000 SYSTEM CPLD 10
Stack-unit 0 S6000 MASTER CPLD 12
Stack-unit 0 S6000 SLAVE CPLD 10
DellEMC#
Usage
Information
NOTE: A filepath that contains a dot ( . ) is not supported.
show running-config
Display the current configuration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status] [compressed]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) configuration, enter one
of the following keywords:
NOTE: If you did not configure anything that entity, nothing displays and the
prompt returns.
aaa
for the current AAA configuration
acl
for the current ACL configuration
arp
for the current static ARP configuration
as-path
for the current AS-path configuration
bfd
for the current BFD configuration
bgp
for the current BGP configuration
boot
for the current boot configuration
cam-profile
for the current CAM profile in the configuration
class-map
for the current class-map configuration
community-
list
for the current community-list configuration
ecmp-group
for the current ECMP group configuration
eis
for the current EIS configuration
ethernet
for the current Ethernet CFM configuration
fefd
for the current FEFD configuration
ftp
for the current FTP configuration
frrp
for the current FRRP configuration
fvrp
for the current FVRP configuration
gvrp
for the current GVRP configuration
host
for the current host configuration
hardware-
monitor
for hardware-monitor action-on-error settings
hypervisor
for the current hypervisor configuration
72 File Management