Users Guide
Table Of Contents
- About your monitor
- Setting up the monitor
- Operating your monitor
- Troubleshooting
- Appendix
- About your monitor
- Package contents
- Product features
- Setting up the monitor
- Operating your monitor
- Troubleshooting
- Appendix
- Package contents
Troubleshooting │ 57
Dell
P2418HZ
Dell 20 Monitor
No DP Cable
www.dell.com/support/monitors
?
P2018H
The display will go into Standby Mode in 4 minutes.
NOTE: This box also appears during normal system operation, if the
video cable is disconnected or damaged.
4.
Turn off your monitor and reconnect the video cable; then turn on both your
computer and the monitor.
If your monitor remains dark after you reconnect the cables, check your video
controller and computer.