Users Guide

About Your Monitor | 19
Power Consumption P
on
13.9 W
Total Energy Consumption (TEC) 45.3 kWh
P2719HC
VESA
Modes
Horizontal
Sync
Vertical
Sync
Video Power Indicator Power Consumption
Normal
operation
Active Active Active White 118.1 W (maximum)**
15.52 W (typical)
Active-off
mode
Inactive Inactive Off White
(Glowing)
Less than 0.3 W***
Switch off -
-
- Off
Less than 0.3 W
Power Consumption P
on
15.5 W
Total Energy Consumption (TEC) 49.7 kWh
NOTE: These monitors P2419HC/P2719HC are ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings which can be
restored by “Factory Reset” function in the OSD menu. Changing the factory default
settings or enabling other features may increase power consumption that could exceed
the ENERGY STAR specified limit.
NOTE:
P
on
: Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
The OSD operates only in the normal operation mode. If you press any button in the active-
off mode, the following message is displayed:
*Zero power consumption in OFF mode can only be achieved by disconnecting
the AC mains cable from the monitor.
**Maximum power consumption with maximum luminance, and USB active.
***Test data is measured based on no USB Type-C cable attached condition.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered
and shall have no obligation to update such information. Accordingly, the customer should
not rely upon this information in making decisions about electrical tolerances or otherwise.
No warranty as to accuracy or completeness is expressed or implied.
Activate the computer and the monitor to gain access to the OSD.