DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix DellEMCTM Enterprise Systems Rail Sizing and Rack Compatibility Matrix This document provides mounting features and key dimensions of the rack rails used for mounting many DellEMC enterprise systems and peripheral devices in a rack enclosure.
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix This document is for informational purposes only and may contain typographical errors and technical inaccuracies. The content is provided as is, without express or implied warranties of any kind. ©2017 DellEMC. All rights reserved. Reproduction of this material in any manner whatsoever without the express written permission of DellEMC is strictly forbidden.
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Contents Introduction ................................................................................................................ 1 Considerations ............................................................................................................. 1 Mounting interface ........................................................................................................ 2 Rail types .........................................
Dell Enterprise Systems Rail Sizing and Rack Compatibility Matrix Introduction This document provides information about the mounting features and key dimensions of the rack rails used for mounting many DellEMC™ enterprise systems and peripheral devices in a rack enclosure. This document also provides a compatibility summary for select DellEMC racks as well as some common third-party racks. Note that the product list is not all-inclusive and updates will be made as needed.
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Some third-party racks may not meet this requirement, and although DellEMC has made extensive efforts to accommodate as many third-party racks as possible, it is not feasible to provide a solution for every circumstance. Mounting interface The ReadyRails™ II mounting interface supports tool-less installation in 4-post square-hole and unthreaded round-hole racks as well as native support for tooled installation in threaded-hole racks.
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix The RapidRails™ mounting interface supports tool-less installation in 4-post square-hole racks only, while the VersaRails™ mounting interface supports tooled installation in 4-post square-hole and unthreaded round-hole racks. Mounting the VersaRails in threaded-hole racks is not recommended and is not supported by DellEMC. The generic mounting interface encompasses all other mounting interfaces outside of the ones listed above.
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix SRBs are offered on select systems as an optional method for managing cables at the rear of the system due to the potential of a cable bundle size that exceeds the capacity of the CMA. The rail depth with a SRB is significantly less than that of a CMA, which in many cases, enables fitment of the rails in shallow racks.
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix 12th Generation product R220 Backward compatibility with 11th generation rails/CMAs Sliding rails N/A CMA N/A Static rails (R210 II) R320 R420 R520 R620 X X X R720/R720xd X X X R820 X X N/A R920 X X N/A T320 (T610) (T610) N/A T420 (T610) (T610) N/A T620 N/A - Compatible X – Not compatible *Only with the previous generation sliding rails Definitions
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Table 2.
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Rack types supported Product Rail identifier Mounting interface Rail type 4-Post Rail adjustability range (mm) 2-Post Square Round Rail depth (mm) Threaded Square Round Thread Flush Center Min Max Min Max Min Max without with CMA/SRB CMA(SRB) T320/T330/T420/T430 T620 C2 ReadyRails II Sliding a,c,d X X 686 756 672 749 686 771 760 840 VRTX C3 ReadyRails II Sliding a,c,d X X 608 915
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Rack types supported KVM SWITCHES PowerEdge C Product Rail identifier Mounting interface Rail type 4-Post Rail adjustability range (mm) 2-Post Square Round Rail depth (mm) Threaded Square Round Thread Flush Center Min Max Min Max Min Max without with CMA/SRB CMA(SRB) C1100 - Generic Tool-less Sliding X X X 665 950 665 950 - - 685 - C2100 - Generic Sliding X X 664 1110 664 1
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Rack types supported Product Rail identifier Mounting interface Rail type 4-Post Rail adjustability range (mm) 2-Post Networking Square Round Thread Flush Center Square Round Rail depth (mm) Threaded Min Max Min Max Min Max without with CMA/SRB CMA(SRB) PC8132/PC8132F PC8164/PC8164F A5 ReadyRails Static 470 770 456 763 462 794 480 - S4820T/S6000 A5 ReadyRails Static
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Rack types supported Rail type 4-Post Rail adjustability range (mm) 2-Post Square Round Rail depth (mm) Threaded Square Round Thread Flush Center Min Max Min Max Min Max without with CMA/SRB CMA(SRB) ReadyRails II Sliding a,c,d X X 631 868 617 861 631 883 714b 845 B4 ReadyRails Static a,c a,c c 608 879 594 872 608 890 622 - T7600/T7610 C2 ReadyRails II Sliding a,c,
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Rack types supported Product Rail identifier Mounting interface Rail type 4-Post PowerVault™ STORAGE Threaded Min Max Min Max without with CMA/SRB CMA(SRB) A7 ReadyRails II Sliding a,c,d X X 631 868 617 861 631 883 720b 845 A8 ReadyRails Static a,c a,c c 608 879 594 872 604 890 622 - B6 ReadyRails II Sliding a,c,d X X 631 868 617 861 631 883 714b 845 B4 Re
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Rack types supported Product Rail identifier Mounting interface Rail type 4-Post Rail adjustability range (mm) 2-Post Square Round Thread Flush Center Square Round Rail depth (mm) Threaded Min Max Min Max Min Max without with CMA/SRB CMA(SRB) - RapidRails Static X X X X 732 759 - - - - 729 - - VersaRails Static X X X 714 759 714 759 - - 721 - - RapidRails Static X X X X
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Rack types supported Product Mounting interface Rail type 4-Post Rail adjustability range (mm) 2-Post Square Round Rail depth (mm) Threaded Square Round Thread Flush Center Min Max Min Max Min Max without with CMA/SRB CMA(SRB) B6 ReadyRails II Sliding a,c,d X X 631 868 617 861 631 883 714b 845 B4 ReadyRails Static a,c a,c c 608 879 594 872 608 890 622 - - Generic Static
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix Notes: a Minor conversion required b With CMA brackets removed c Mounting screws not included in the kit d Mounting screw head diameter must be 10 mm or less e Requires the 1U Threaded Rack Adapter Brackets Kit (Dell PN 8Y19G), which shifts the system forward in the rack by 17.3 mm f Requires the 2U Threaded Rack Adapter Brackets Kit (Dell PN PKCR1), which shifts the system forward in the rack by 17.
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix 2 1 2 A8 ReadyRails Static A10 Generic Tool-less Sliding 2 1 A7 ReadyRails II Sliding 3,4 2 9 1 A8 ReadyRails Static A10 Generic Tool-less Sliding 3,4 2 9 B6 ReadyRails II Sliding 2 B4 ReadyRails Static B13 Generic Tool-less Sliding 2 B6 ReadyRails II Sl
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix B10 ReadyRails II Sliding 4,6,12 5 10 10 10,13 10 4,6,12 X 10 10,13 B11 ReadyRails II Static 4,6 10 10 4,6 X 10 10 C4130 A9 ReadyRails II Sliding 7 T630 C4 ReadyRails Sliding 2 T320/T330/T420/T620 C2 ReadyRails II Sliding 2 VRTX C3 ReadyRails II Sliding A4 ReadyRails A6 FX2/FX2s R210/R210 II/R220 R230 4,7,10 10 10 10 X X X
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix R715/R810/R815/R910 B2 ReadyRails Sliding 3 2 1 3 X T610/T710 C1 ReadyRails Sliding 2 1 2 X - RapidRails Static 4,5 4,5 X - VersaRails Static 4,5 4,5 X C1100 - Generic Tool-less Sliding X C2100 - Generic Slid
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix 1081AD/2161AD 1082DS/2162DS A5 ReadyRails Static - - Generic Static - - Generic Static - A5 ReadyRails Static - S4820T/S6000 A5 ReadyRails Static - S5000 - Generic Static
OTHER DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix 1U Fixed Equipment Shelf A4 ReadyRails Static - A7 ReadyRails II Sliding 2 1 2 X A8 ReadyRails Static B6 ReadyRails II Sliding 2 1 2 B4 ReadyRails Static A3 ReadyRails Sliding 2 1
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix - RapidRails Static X X X - VersaRails Static X - RapidRails Static X X X - VersaRails Static X - RapidRails Static X - VersaRails Static X B7 ReadyRails Static
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix - RapidRails Static X - VersaRails Static X A1 ReadyRails Sliding 3 2 1 3 X A2 ReadyRails Static 15 FS7500 UPS A4 ReadyRails Static 15 FS76xx/PS41xx/ B9 ReadyRails II Static
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix PS4000/6000/6010 - Generic Static SC20xx/SC40xx - Generic Static B6 ReadyRails II Sliding 2 1 B4 ReadyRails Static B9 ReadyRails II Static - RapidRails Static - VersaRails Static SCV30xx SC50xx SC7020 B9 ReadyRails II Static Series 40 - Generi
DellEMC Enterprise Systems Rail Sizing and Rack Compatibility Matrix SAS (old rails) - Generic Static X NAS Gen3 - Generic Sliding 6 6 X Notes: 1 A rear door extension kit is required to accommodate the CMA. 2 CMA may impede access to forward bank of rear-mount PDUs. 3 CMA and outer CMA brackets must be removed in order to access the forward bank of rear-mount PDUs.