Users Guide

12 | About Your Monitor
Electrical Specifications
*Support DP1.2 (CORE) specification. Excludes High Bit Rate 2 (HBR2), Fast AUX
transaction, Multi-stream transport (MST), 3D stereo transport, HBR Audio (or high data
rate audio)
Physical Characteristics
Model P2214H/P2414H
Video input signals • Analog RGB, 0.7 Volts +/- 5%, positive polarity at
75 ohm input impedance
• Digital DVI-D TMDS, 600 mV for each differential
line, positive polarity at 50 ohm input impedance
• DP 1.2 signal input support*
Synchronization input signals Separate horizontal and vertical synchronizations,
polarity-free TTL level, SOG (Composite SYNC on
green)
AC input voltage/frequency/
current
100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.2 A
(typical)
Inrush current • 120 V: 30 A (Max)
• 240 V: 60 A (Max)
Model P2214H P2414H
Connector type 15-pin D-subminiature,
blue connector; DVI-D,
white connector; DP, black
connector
15-pin D-subminiature,
blue connector; DVI-D,
white connector; DP, black
connector
Signal cable type • Digital: detachable, DVI-
D, solid pins, shipped
detached from the
monitor
• Digital: DisplayPort, 20
pin
• Analog: attachable, D-
Sub, 15 pins, shipped
detached from the
monitor
• Digital: detachable, DVI-
D, solid pins, shipped
detached from the
monitor
• Digital: DisplayPort, 20
pin
• Analog: attachable, D-
Sub, 15 pins, shipped
detached from the
monitor
Dimensions (with stand)
Height (extended) 483.6 mm (19.04 inches) 499.0 mm (19.65 inches)
Height (compressed) 354.2 mm (13.94 inches) 369.0 mm (14.53 inches)