User Manual

48 | Operating the Monitor
When the monitor does not support a particular
resolution mode, you will see the
following message:
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See Monitor Specifications for the Horizontal and Vertical frequency
ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled:
When the monitor goes into power-save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD .
If you press any button other than the power button, the following me
ssage will appear
depending on the selected input:
NOTE: The message may be slightly different according to the connected input
signal.