Users Guide
Table Of Contents
- About your monitor
- Setting up the monitor
- Operating your monitor
- Power on the monitor
- Using the front panel controls
- Using the on-screen display (OSD) menu
- Setting up your monitor
- Using the Tilt, Swivel, and Vertical Extension
- Operating the webcam cover shutter
- Installing the monitor IR Camera driver
- Setting up Windows Hello
- Setting up the monitor webcam as default setting
- Setting up the monitor speaker as default setting
- Troubleshooting
- Appendix
About your monitor | 23
Universal serial bus (USB) interface
This section gives you information about the USB ports that are available
on the monitor.
NOTE: This monitor is Super-Speed USB 3.0 and High-Speed USB 2.0
compatible.
Transfer Speed Data Rate Power Consumption*
Super-speed 5 Gbps 4.5 W (Max, each port)
High speed 480 Mbps 4.5 W (Max, each port)
Full speed 12 Mbps 4.5 W (Max, each port)
Transfer Speed Data Rate Power Consumption
High speed 480 Mbps 2.5 W (Max, each port)
Full speed 12 Mbps 2.5 W (Max, each port)
Low speed 1.5 Mbps 2.5 W (Max, each port)
*Up to 2A on USB downstream port (port with lightning icon) with BC1.2
compliance devices or normal USB devices.
USB 3.0 upstream connector
Pin Number 9-pin Side of the Connector
1 VCC
2 D-
3 D+
4 GND
5 SSTX-
6 SSTX+