Users Guide
Table Of Contents
- About your monitor
- Setting up the monitor
- Operating your monitor
- Power on the monitor
- Using the front panel controls
- Using the on-screen display (OSD) menu
- Setting up your monitor
- Using the Tilt, Swivel, and Vertical Extension
- Operating the webcam cover shutter
- Installing the monitor IR Camera driver
- Setting up Windows Hello
- Setting up the monitor webcam as default setting
- Setting up the monitor speaker as default setting
- Troubleshooting
- Appendix
34 | Operating your monitor
3
Volume Down
Up
• Use Volume Down button to decrease OSD
bar volume.
• Use the Up button to adjust (increase
ranges) items in the OSD menu
4
Volume Up
Down
• Use Volume Up button to increase OSD bar
volume.
• Use the Down button to adjust (decrease
ranges) items in the OSD menu.
5
Microphone
Mute
OK
• Use the Microphone Mute button to mute
microphone.
• Use the OK button to confirm your
selection.
6
MENU
Back
• Use the MENU button to launch the OSD.
• Use the Back button to go back to the
previous menu.
See Accessing the Menu System.
7
Power On/Off button
(with power-status light)
To turn the monitor on or off.
Solid white light indicates the monitor is turned
on and functioning normally.Blinking white light
indicates the monitor is in Standby Mode.