Users Guide

About Your Monitor | 15
Model P2719HC
Video input signals • HDMI 1.4, 600 mV for each dierential line, 100 ohm input
impedance per dierential pair
• DisplayPort 1.2, 600 mV for each dierential line, 100 ohm
input impedance per dierential pair
• USB Type-C, 600mV for each dierential line, 90 ohm input
impedance per dierential pair
AC Input voltage/
frequency/current
100-240 VAC / 50 or 60 Hz ± 3 Hz / 1.6A (typical)
Inrush current • 120 V: 30 A (Max.) at 0 °C (cold start)
• 220 V: 60 A (Max.) at 0 °C (cold start)
Power Consumption
P2419HC P2719HC
0.2 W (Off Mode)
1
0.2 W (Standby Mode)
1
14.2 W (On Mode)
1
119 W (Max)
2
13.9 W (P
on
)
3
45.3 kWh (TEC)
3
0.2 W (Off Mode)
1
0.2 W (Standby Mode)
1
13.8 W (On Mode)
1
118.1 W (Max)
2
15.5 W (P
on
)
3
49.7 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting with maximum power loading on all USB ports.
3
P
on
: Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered
and shall have no obligation to update such information. Accordingly, the customer should
not rely upon this information in making decisions about electrical tolerances or otherwise.
No warranty as to accuracy or completeness is expressed or implied.
NOTE: These monitors P2419HC/P2719HC are ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings which can be
restored by “Factory Reset” function in the OSD menu. Changing the factory default
settings or enabling other features may increase power consumption that could exceed
the ENERGY STAR specified limit.