Users Guide
Table Of Contents
76 │ Trou b l esh o otin g
Product specific problems
Common
symptoms
What you
experience
Possible solutions
Screen image is too
sma
ll
Image is centered on
screen, but does not
fill entire viewing
area
• Check the Asp
ect Ratio setting in
the Display settings OSD.
• Reset the monitor to factory settings.
Cannot adjust the
monit
or with the
joystick
OSD does not
appear on the screen
• Turn Off the monitor, unplug the
power cord, plug it back, and then
turn On the monitor.
• Check whether the OSD menu is
l
ocked. If yes, move and hold the
joystick up/down/left/right for 4
seconds to unlock (for more
information, see Lock).
No input signal
wh
en user controls
are pressed
No picture, the LED
light is white
• Check the signal source. Ensure the
computer is not in the power saving
mode by moving the mouse or
pressing any key on the keyboard.
• Check whether the signal cable is
p
lugged in properly. Re-plug the
signal cable if necessary.
• Reset the computer or video player.
The picture does
no
t fill the entire
screen
The picture cannot
fill the height or
width of the screen
• Due to different video formats
(aspect ratio) of DVDs, the monitor
may display in full screen.
• Run the built-in diagnostics.
No video at HDMI/
Disp
layPort/USB
Ty p e- C p o r t
When connected to
some dongle/
docking device at
the port, there is no
video when
unplugging/plugging
the cable from the
notebook
• Unplug the HDMI/DisplayPort/USB
T
ype-C cable from dongle/docking
device, then plug the docking HDMI/
DisplayPort/USB Type-C cable to the
notebook.