Users Guide
Operating your monitor │ 47
OSD warning messages
When the monitor does not support a particular resolution mode, the following
message is displayed:
The current input timing is not supported by the monitor display.
Please change your input timing to 2560x1440, 60Hz or any other
monitor listed timing as per the monitor specications.
Dell 27 Monitor
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See Monitor specifications for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 2560 x
1440.
Before the DDC/CI function is disabled, the following message is displayed:
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
No
Dell 27 Monitor
P2720D
When the monitor enters the Power Save Mode, the following message appears:
Dell
P2418HZ
Dell 27 Monitor
Entering Power Save Mode.
P2720D
If you press any button other than the power button, the following messages will
appear depending on the selected input: