User's Manual
Table Of Contents
- CAUTION: Safety Instructions
- When Using Your Device
- Finding Information
- About Your Device
- Using Microsoft® Windows Mobile™ 2003 Second Edition
- Entering Information
- Adjusting Settings
- Using the Microsoft® ActiveSync® Program
- Scheduling and Communicating
- Adding and Removing Programs
- Using Companion Programs
- Using Microsoft® Pocket Internet Explorer
- Getting Connected
- Appendix
- Specifications
- U.S. Terms and Conditions of Sale
- Dell™ Software License Agreement
- Regulatory Notices
- Wireless Regulatory Information
- Contacting Dell
- Limited Warranties
- Limited Warranty for Dell-Branded Hardware Products (U.S. Only)
- Total Satisfaction Return Policy (U.S. Only)
- Limited Warranty Terms for Dell-Branded Hardware Products (Canada Only)
- "Total Satisfaction" Return Policy (Canada Only)
- Dell Software and Peripherals (Canada Only)
- 1-Year End-User Manufacturer Guarantee (Latin America and the Caribbean Only)
- Glossary
www.dell.com | support.dell.com
94 Getting Connected
Creating a Modem Connection
1
Install a modem card and appropriate adapters to connect an external
modem to your device through the serial port.
2
Obtain the following information from your ISP:
- ISP dial-up access telephone number
- Username and password
- TCP/IP settings
Some ISPs require information in front of the username, such as
MSN/username
.
3
Tap t he
Start
button
→
Settings
→
Connections
tab
→
Connections
.
4
Under
My ISP
or
My Work Network
, tap
Add a new modem connection
.
5
Enter a name for the connection, such as
ISP Connection
.
6
From the
Select a modem
list, select your modem type, and tap
Next
.
If your modem type does not appear, try reinserting the modem card. If
you are using an external modem that is connected to your device with
a cable, select
Hayes Compatible on COM1
.
7
Enter the access phone number and tap
Next
.
8
Enter your user name, password, and, if applicable, your domain.
NOTE: You should not need to change any settings in Advanced. Most ISPs
now use a dynamically assigned address.
9
If the ISP you are connecting to does not use a dynamically assigned
address, tap
Advanced
, tap the
TCP/IP
tab, and then enter the address.
10
Ta p
Next
.
11
Select other appropriate options and tap
Finish
.